Call Us at +36 (20) 4294-745

Saunacolor

Subscribe to RSS Feed

Sauna paints

Supi Sauna Wax

SUPI SAUNA VAX

PRODUCT FEATURES:

Supi Sauna Wax is absorbed into the wood and it forms a humid and dirt resistant surface.

RECOMMENDED USES:

Sauna benches, panelled walls and ceilings, doors and window frames.


 

TECHNICAL DATA:

 

Base paints:

EP

Colour Range:

Colours 3441-3451 from the Interior Lacquer colour card. Standard colours black, white and grey.

Gloss Grade:

Undefined

Building material emission class:

M1

 

Coverage:

10-13 m2/l depending on wood species.

Can sizes:

0,225 l, 0,9 l, standard colours 1/3 l and 1 l.

Thinner:

Water

Application method:

Foam brush, sponge or brush with artificial bristles.

Drying time at 23°C and 50% relative air humidity

Dust dry after 30 min - 1 hour. Ready for use after 24 hours.

 

Solids volume:

Approx. 24 %.

Density:

1,0 kg/l, ISO 2811

Storage:

Protect from frost..

Product code:

0017060-63


 

APPLICATION DETAILS:

APPLICATION CONDITIONS:

The surface to be painted must be dry, the temperature of the air at least +5 oC, and the relative humidity of the air below 80 %.

SURFACE PREPARATION:
New clean wood surfaces:

Remove dirt and dust. Moisten lightly with water spray, let dry and sand loose wood fiber off. Remove sanding dust.

Old dirty and previously with e.g. Supi Sauna Finish treated wood surfaces:

Wash down with Supi Saunapesu Cleaning Agent according to instructions, rinse thoroughly and let dry. Sand and dust off. If any old substrate traces are left under the wax treatment, the end result will be more glossy than on untreated wood.
Supi Sauna Wax is not recommended to be used on oil-treated surfaces (e.g. with Supi Bench Protection), if oil is not worn off.

Protect floors well before treatment, because Supi Sauna Wax is absorbed easily into ceramic tile joints.

WAXING

Stir Supi Sauna Wax properly, from time to time also during usage. Apply one coat of wax along the grain, not using more wax than the wood can absorb. Because the wax is very liquid, most suitable application method is foam brush or sponge. The surface remains greasy, if too much wax is applied.

Make a trial with a coloured Supi Sauna Wax on a hidden spot to be sure of a correct colour. The final colour of the surface depends on the wood species. Treat small surfaces in one go to avoid overlapping and large panel surfaces 1-2 panels at a time to achieve a uniform colour.

Pre-heat and ventilate the steam room thoroughly before use.

Thermally modified wood surfaces are recommended to be treated with Supi Sauna Wax tinted to colour TVT 318R.

CLEANING OF TOOLS:

Clean the tools with water. Tikkurila Tool Cleaner is recommended for removal of hardened wax

MAINTENANCE INSTRUCTIONS:

Cleaning earliest abt. 1 month after applicaton, if necessary:
Clean the surface with Supi Saunapesu Cleaning Agent (1-2 dl of cleaning agent into 5 litres of water).

EU VOC 2004/42/ECLIMIT VALUE:

(cat A/f) 130g/l(2010)

HEALTH AND SAFETY LABELLING according to Regulation (EC) No.1272/2008:

The product is not classified as dangerous. A Safety Data Sheet is available on request.

ENVIRONMENTAL and WASTE DISPOSAL:

Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.

The above information is not intended to be exhaustive or complete. The information is based on laboratory tests and practical experience, and it is given to the best of our knowledge. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As manufacturer we cannot control the conditions under which the product is being used or the many factors that have an effect on the use and application of the product. We disclaim liability for any damages caused by using the product against our instructions or for inappropriate purposes. We reserve the right to change the given information unilaterally without notice.