You have no items in your shopping cart.
SUPI SAUNAPESU
SUPI SAUNAPESU CLEANING AGENT
DESCRIPTION:
SUPI Saunapesu is an acidic cleaning agent which bleaches and dissolves lime scale deposits in saunas and other humid rooms.
PRODUCT FEATURES:
For saunas and other humid rooms. Gentle and thus non-corrosive. However, care should be taken when cleaning tile joints with concentrated and strong solutions. Do not use together with products containing chlorine.
RECOMMENDED USES
For saunas and other humid rooms.
TECHNICAL DATA:
Can Sizes:
0,5 l; 1 l
Thinner:
Water
Mixing ratio:
Depending on the degree of contamination, add 1 to 2 dl of Supi Saunapesu to 5 litres of water. pH value of ready-to-use solution: approx. 2
Application method:
Brush or sponge.
Density:
1.03 kg/l, ISO 2811
Storage:
Protect from frost..
Product Code:
001 7099
APPLICATION DETAILS:
APPLICATION CONDITIONS:
The temperature of the air should be at least +5 ºC, and the relative humidity of the air below 80 %.
Cleaning:
Dosage:
Depending on the degree of contamination, add 1 to 2 dl of Supi saunapesu to 5 litres of water.
Dissolving of lime:
Use a 10-15% solution. Supi Saunapesu can be used unthinned on persistent lime scale deposits and dirt stains.
Bleaching of sauna benches:
Mix equal amounts of SUPI Saunapesu and water (1:1), and allow to act for approx. 15 minutes.
Note! Always rinse the surface with clean water after treatment.
CLEANING OF TOOLS:
Clean with water.
HEALTH AND SAFETY LABELLING according to Regulation (EC) No.1272/2008:
Corrosive, C Contains: Phosphoric acid Safety data sheet
ENVIRONMENTAL and WASTE DISPOSAL:
Avoid spillage into drains, water systems and soil. Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations for hazardous waste.
TRANSPORT:
VAK/ADR 8 III
The above information is not intended to be exhaustive or complete. The information is based on laboratory tests and practical experience, and it is given to the best of our knowledge. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As manufacturer we cannot control the conditions under which the product is being used or the many factors that have an effect on the use and application of the product. We disclaim liability for any damages caused by using the product against our instructions or for inappropriate purposes. We reserve the right to change the given information unilaterally without notice.
Webstore products
